Kinetico RO-Compact Series Installation And User Manual page 3

Location of the RO-unit:
!
The RO-unit must be installed in a location with open floor drain
Install the RO-unit in a frost-free location.
Install the RO-unit on an even horizontal surface, otherwise the storage



tank of the RO-unit may overflow.
The surface must be capable of withstanding a weight of approx.
If you install the RO-unit under a work surface, allow a clearance height
of 101 cm for removing the cover. If sufficient space is not available, the
RO-unit can also be pulled out forwards for servicing. In this case, a
flexible hose must be used for the water connection.
Make room behind the RO-unit for the water in- and outlet installations.
It is important that the drain hose does not fold!
Sufficient space must be allowed to the sides and rear of the RO-unit to
avoid blocking the ventilation grids of the integrated pumps.

The location has an open gully

Frost-free, even and horizontal surface

Surface is capable of withstanding a weight of approx. 76 - 138 kg.

Sufficient place is allowed to the sides and the rear of the RO-unit for in- and
outlet installation and ventilation.
76 kg – RO-Compact1
125 kg – RO-Compact2
138 kg – RO-Compact3
3