Rize Tranquility Owner's Manual page 8

Installation Guide
Setting up the electronics
1
Extend the power cord from the adjustable bed.
2
Turn the adjustable bed over carefully so the top side is now
facing upward.
NOTE:
Do not rest the adjustable bed on its side. The weight
may damage the legs.
3
Plug the power cord into a working electrical outlet.
NOTE: For optimal safety, using a surge protector (not
included) is highly recommended.
4
Install batteries in the remote control. Try all functions on the
remote to make sure all features are operational.
NOTE: If the bed does not work, see the Troubleshooting
section of this manual.
Installing the mattress retainer bar
1
Align both ends of the retainer bracket with the holes
located at the foot of the bed, and then insert them into the
holes.
2
Place your mattress on the adjustable bed.
NOTE:
It is normal for the retainer bracket to indent into
the sides of the mattress when using the lift positions. This
secures the mattress to the bed deck providing superior
body contouring.
Your adjustable bed installation is now complete.
Using the bed leg strap (optional)
To help prevent separation when using two (2) adjustable beds,
use the bed leg strap.
1
Wrap the bed legs (front or back) together tightly using the
bed leg strap.
2
Fasten the strap to prevent movement & maintain stability.
8
IMPORTANT!
Make sure power cords do
not obstruct any adjustable
bed mechanisms.