Analogue Outputs; Operating Level Selection - Focusrite Red 8Pre User Manual

analogue outputs

[8/16/16] analogue outputs are provided on DB25 female connector(s)
on the rear panel.
The Line outputs for Red 4Pre and Red 8Pre are at fixed gain, where
0 dBFS corresponds to a signal level of +18 dBu.

operating Level selection

(Red 16Line only)
The operating level for each Line output can be switched between
+18 dBu and +24 dBu to correctly match additional studio equipment.
Press and hold the output button until the level selection menu
1
appears on the Input Display
Scroll to the required channel number for individual selection
2
or to all for global selection
Click the Input Encoder to toggle between +18 dBu and +24 dBu
3
Press the Output button again to exit
4
Input and output operating level selection can be linked or unlinked. Refer to:
Global Settings – I/O Level on page 22 for additional information.
18