Focusrite Red 8Pre User Manual page 42

Monitor outputs
Maximum Output Level
Dynamic Range
Frequency Response
THD + N
headphone outputs
Maximum Output Level
Dynamic Range
Frequency Response
THD + N
Output Impedance
Headphone Impedance
Digital Performance
Supported Sample Rates
Clock Sources
Connectivity
Front Panel
Instrument Input
Headphone Output
Rear Panel
Thunderbolt
Pro Tools | HD
Dante
Mic Input
Line Input
Line Output
ADAT
S/PDIF
Monitor Output
Loop Sync
Word Clock
PSU
+18 dBu 0 dBFS
120 dB 'A'-Weighted
20 Hz – 35 kHz ±0.2 dB
0.0012%
+16 dBu
114 dB 'A'-Weighted
20 Hz – 20 kHz ±0.2 dB
0.018%
10 Ω
32 – 600 Ω
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz 24 bit
Internal, ADAT, S/PDIF, Word Clock, Loop Sync or from Dante Network Master
2 x 1/4" TS stereo Jack
2 x 1/4" TRS stereo Jack
2 x Thunderbolt 2 or 3 connections
2 x Mini DigiLink
2 x Ethernet standard RJ45 (Cat 5e and above)
[4/2] x XLR-3F (Red 4Pre & Red 16Line)
1 x DB25-F (Red 8Pre)
2 x DB25-F
2 x DB25-F
2 x TOSLINK input, 2 x TOSLINK output
RCA Phono (TOSLINK up to 96 kHz) input, RCA Phono (TOSLINK up to 96 kHz) output
2 x 1/4" TRS stereo Jack
BNC 75Ω input, BNC 75Ω output,
BNC 75Ω input, BNC 75Ω output,
IEC
42