Physical Configuration; Front Panel Controls, Indicators And Test Points; Controls; Indicators - RF Technology Eclipse Series Operation And Maintenance Manual

7.2 Physical Configuration

7.2 Physical Configur ation
The transmitter is designed to fit in a 19 inch rack mounted sub-frame. The installed height is
4 RU (178 mm) and the depth is 350 mm. The transmitter is 63.5 mm or two Eclipse modules
wide.
7.3 Fr ont Panel Contr ols, Indicator s, and Test Points
7.3.1 Contr ols
Transmitter Key - Momentary Contact Push Button
Line Input Level - screwdriver adjust multi-turn pot
7.3.2 Indicator s
Power ON - Green LED
Tx Indicator - Yellow LED
Fault Indicator - Flashing Red LED
External ALC - Green LED
External Reference - Green LED
7.3.3

Test Points

Line Input –
Forward Power –
Reverse Power –
Tuning Voltage –
Serial Data (RS-232) – Pins 2 / 3 + Ground (pin 1)
7.4 Electr ical Specifications
7.4.1 Power Requir ements
Operating Voltage - 10.5 to 16 Vdc with output power reduced below 12 Vdc
Current Drain - 5A Maximum, typically 0.25A Standby
Polarity - Negative Ground
___________________________________________________________________________
RF Technology T800
Pin 6 + Ground (pin 1)
Pin 8 + Ground (pin 1)
Pin 4 + Ground (pin 1)
Pin 9 + Ground (pin 1)
7 SPECIFICATIONS
Page 22