Advertisement
Install the software by updating your Xbox console on Xbox LIVE:
Start your console.
1
Connect to Xbox LIVE.
2
When you connect to Xbox LIVE, your console updates automatically. The speed wheel software is included in the update.
Installing from Xbox LIVE is recommended for the latest speed wheel software. If you do not have Xbox LIVE access, use the supplied software disc.
Install the software using the included disc:
1 Start your console and load the disc. The update will install automatically.
2 When the installation confirmation message appears, remove the disc, and then restart your console.
Install the software using a USB drive:
Use your computer to navigate to www.xbox.com/live.
1
2
Download the speed wheel software to your computer.
3
Connect a USB drive to your computer and save the speed wheel software to the USB drive.
You can also burn the software onto a compact disc.
Disconnect the USB drive from your computer, connect it to your console, and then restart your console.
4
If you burned the software onto a compact disc, insert the disc into your console and the software updates automatically.
Insert Batteries
The speed wheel uses AA (LR6) alkaline batteries. The battery release button and battery door are on the bottom of your speed wheel.
To insert batteries into the speed wheel:
Turn the speed wheel upside down.
1
Press the battery release button.
2
The battery door opens.
Insert two new AA (LR6) batteries with their positive (+) and negative (–) ends positioned as shown on the battery compartment. For best
3
performance, AA rechargeable batteries are not recommended.
Replace the battery door and push to lock in place.
4
Connect Your Speed Wheel to Your Console
You'll need to connect your speed wheel and console before you can use the wheel to play a game.
To connect your speed wheel and console:
Start your console.
1
If you haven't installed the speed wheel software on your console, do so now by following the instructions in Install the Speed Wheel Software.
To start your speed wheel, press and hold the Start or Guide button until the controller lights flash.
2
On your console, press the Connect button.
3
On your wheel, press the Connect button.
4
The light on the right handle of the wheel flashes while connecting. When the wireless connection is completed, one segment on the wheels's
light ring illuminates.
USING YOUR SPEED WHEEL
Speed Wheel Controls
Your speed wheel has several controls that you can use for wheel setup and gameplay. These include buttons, lights, and triggers, which are
located on the handle bars and in the center of the speed wheel.
Advertisement
