INDIAN CHIEF SERVICE MANUAL
Engine Serial Number
Location — The 6-digit engine serial number is
stamped into a pad on the left side of the engine
crankcase, just above the primary housing and at the
base of the rear cylinder.
MAINTENANCE SERVICE, REPAIRS AND SAFETY
This is a complete manual, providing the information
necessary to perform full overhaul and rebuild
operations in addition to the very routine maintenance
service and adjustments. Procedures are included for
servicing components and subassemblies off the
motorcycle from disassembly, cleaning and inspection
to reassembly.
Generally, all specifications including torque values are
given in English measurements. Where applicable,
however, metric measurements and values are
provided.
Note: Indian Motorcycle Corporation continuously
strives for improvements in product design, quality and
performance. As a result of running changes made during
the production cycle, the information, illustrations and
descriptions in this manual may differ from the motorcycle
that is in for service.
For your own safety and proper service of the
motorcycle, follow the instructions and warnings
contained in this manual. Ignoring them could result in
damage to the motorcycle or personal injury to you or
others.
GENERAL INFORMATION
Transmission Serial Number
Location — The transmission serial number is a
7-position alphanumeric number stamped into the
transmission case on the top edge of the starter-
mounting flange.
A "warning" indicates the possibility of personal
injury to yourself or others if the instructions
presented are not followed.
A "caution" indicates the possibility of damage to the
motorcycle if the instructions presented are not
followed.
Note: A "note" (placed in italic type) indicates
information that may be important in understanding the
significance of a procedure or useful in performing the
maintenance, adjustment or repair procedure.
5