Fitted Installation (With Barbecue) - Smeg MC30RA Instruction Manual

6.3 Fitted installation (with barbecue)

After having aligned the height of the two products using the feet, the module can be installed following
the measurements provided and the following instructions:
MEASUREMENTS FOR EMBEDDED INSTALLATION OF THE MC30 MODULE + BARBECUE
FRONT CROSS-SECTION
HOLE FOR REAR
GAS CONNECTION
ONLY NON-COMBUSTIBLE MATERIAL
Distances less than those indicated can cause risks to the structure and the user.
It is possible reach the gas cylinder through a hole made in the structure (taking care to protect the edge
of the hole in order to avoid damaging the gas connection tube).
Bring the two products side by side, aligning their heights and depths without leaving any spaces
between them.
36
Instructions for the installer
VIEW
DISTANCES IF
SIDE WALLS PRESENT
POSSIBLE LOWER
COMPARTMENT
Distances less than those indicated can cause risks to the structure and the
user.
MATERIAL
NOT COMBUSTIBLE
COMBUSTIBLE
SIDE CROSS-SECTION
VIEW
PASSAGE FOR LOWER
GAS CONNECTION
MODELS
HEIGHT MC30 + BQ60
A 910 mm
C 150 mm
B 920 mm
C 200 mm
DISTANCE IF REAR
WALL PRESENT
DISTANCES FOR
ADDITIONAL AIR
INLETS
OUTLETS
FOR ADDITIONAL
AIR INLETS
IF PRESENT
REAR
WALL
MC30 + BQ60
1210 mm
150 mm
1220 mm
200 mm