Verity Medical NeuroTrac Simplex Operation Manual page 26

Table 201:
The NeuroTrac® product is intended for use in the electromagnetic
environment specified below. The customer or the user of the The NeuroTrac®
product should ensure that it is used in such environment
Emission test
RF emission
CISPR 11
RF emission CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Table 202:
The NeuroTrac® product is intended for use in the electromagnetic environ-
ment specified below. The customer or the user of theNeuroTrac® product
should assure that it is used in such an environment, and that precautions
regarding that environment are heeded.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
Guidance and manufacturer's declaration
- electromagnetic emission
Compliance
Group 1
Class B
Not applicable
Not applicable
Guidance and manufacturer's declaration
– electromagnetic immunity
IEC 60601 Compliance
test level
6 kV contact ±6 kV contact
±8 kV air ±8 kV air
3 A/m 3 A/m
NeuroTrac Simplex - Operation Manual
®
Electromagnetic environment
guidance
The NeuroTrac® product uses RF energy only
for its internal function.
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment
The NeuroTrac® product is suitable for use in
all establishments , including domestic
establishments and those directly connected
to the public low voltage power supply
network that supplies buildings used for
domestic purposes
level environment guidance
Floors should be wood, con-
crete or ceramic tile. If floors are
covered with synthetic material,
the relative humidity should be
at least 30 %.
Power frequency magnetic
fields should be at levels char-
acteristic of a typical location in
a typical commercial or hospital
environment.
26
Therefore, its RF
Electromagnetic