Advertisement
Before doing any action, disconnect the
appliance from the input power.
7) COMPONENTS SUBSTITUTION
To replace the components lodged in the internal
part, is necessary to take the appliance up from the
furniture, overturn it, loosen the screws and take
away the bottom.
After these actions is possible to work on the plates,
commutators, clamps and input cable.
In case of substitution of the input cable, the
installer must keep the "earth" conductor longer
Denominations
Radiant electric heating element Ø 145 mm
Radiant electric heating element Ø 145 mm "Hi-light"
Radiant electric heating element Ø 180 mm
Radiant electric heating element Ø 180 mm "Hi-light"
Radiant electric heating element double cooking zone conc. Ø 180/120 mm ("Hi-light" as well)
Radiant electric heating element double cooking zone oval 265/170 mm
Radiant electric heating element double cooking zone oval 265/170 mm "Hi-light"
Radiant electric heating element grill
TYPE AND SECTION OF THE POWER CABLES (for 4 HEATING ELEMENTS)
Cable type
Rubber
H05 RR-F
(*) keeping in mind the contemporaneousness factor
TYPE AND SECTION OF THE POWER CABLES
Cable type
Rubber
H05 RR-F
(*) keeping in mind the contemporaneousness factor
MAINTENANCE
POWER OF ELECTRICAL COMPONENTS
Single phase power Three phase power Three phase power
monofase
230 - 240 V ~
2
3 X 2.5 mm
(*)
than "live" ones, and must respect the cautions
in paragraph "ELECTRICAL CONNECTION".
To reassemble the appliance repeat the inverse
process.
8) TECHNICAL CHARACTERISTICS OF
THE ELECTRICAL COMPONENTS
To facilitate the job of the installer we present a
scheme with the characteristics of the components.
Trifase
400 – 415 V 3N ~
2
5 X 1.5 mm
(*)
(for 2 or 1 HEATING ELEMENTS)
Single phase power
230 - 240 V ~
2
3 X 1.5 mm
(*)
27
W
1200
1200
1700
1800
1700
2200
2400
2200
Trifase
400 - 415 V 2N ~
2
4 X 1.5 mm
(*)
Advertisement
