Dremel 3D40 Original Instructions Manual page 15

Z-AXIS
LANGUAGE DISPLAY
OFFSET
DEMO FACTORY
SOUNDS
MODE RESET
CHECK
FOR UPDATES
BACK
SETTINGS
LANGUAGE – Tap to pick alternate menu
language.
DISPLAY – Tap to customize cabinet LEDs or
main menu hotkeys.
Z-AXIS OFFSET – Used to calibrate build plate
height during assembly.
SOUNDS – Tap to turn 3D40 sounds On/Off.
DEMO MODE – Tap to turn retail demo mode
On/Off.
FACTORY RESET – Tap to remove all
information stored on 3D40 and return it to
factory defaults.
CHECK FOR UPDATES – Tap to check for
new firmware version when connected to Wifi or
Ethernet.
HOME
PREHEAT
Tap to automatically begin preheating the
extruder for building or removing excess debris.
PURGE – Once extruder is hot, tap to manually
extrude filament.
STOP/START – Tap to stop or start preheating.
15