Designed For Safety - raycop VCEN-100 Operating Manual

Designed for Safety

UV Lamp Safety Sensors
（P.8）
A safety device that automatically turns off the UV Lamp when your vacuum is
moved away from the surface. The UV Lamp is automatically turned back on
when your vacuum is placed back on surface again.
Micro HEPA Filter Replacement Alert
（P.16）
RAYCOP will alert you when it is time to replace the Micro HEPA Filter.
You will hear 5 alert chimes, and the red light on the power button( ) will
start flashing.
This alert typically occurs after every 60 hours of use.
Motor Overheating Prevention System
（P.18）
When your vacuum is continuously used for 30 minutes, the motor
overheating prevention device automatically stops suction to prevent
overheating the motor.
This may also occur if the Dust Box or Dust Box Filter is clogged and
requires cleaning.
UV (ultraviolet light) Blocking Feature
Minimizes UV emitted to areas other than the area being cleaned.
Long Use Alert
If your vacuum has been running for 29 minutes, you will hear 5 beeps
and the button( ) will start to flash and turn off automatically
when you let it kept on running for up to 30 minutes.
To continue to use the product, simply turn it back on again.
5