Consumables - raycop VCEN-100 Operating Manual

Replacement of Consumables
■Replacing the Pulsating Brush
Replacement frequency for this part is recommended at once a year when using the product
10 minutes every day. Replace the brush if it is worn out and no longer functions correctly.
After removing the brush by referring to Maintenance of the Pulsating Brush (P.13) attach
the new brush by reversing the procedure used for removal.
■Replacing the Micro HEPA Filter
After approximately 60 hours of use, the Micro HEPA Filter
(if used every day for 10 minutes, this is about one year),
replacement alert sound will chime 5 times to alert that a
replacement is required. Power button will turn red(
and start flashing. Replace the Micro HEPA Filter following
the instructions below.
1
Press the PUSH button at the back of the RAYCOP and lift the Micro HEPA Filter cover
in the direction of the arrow.
2
Move the lock latch of the Micro HEPA Filter in the direction of the arrow to unlock
the Micro HEPA Filter.
5
ダストボックスに標準フィルターをカチッと音がする
まで押し込んでください。
3
Lift the Micro HEPA Filter out by pulling the
handle as shown in the diagram on the right.
16
)