Consumables - raycop VCEN-100 Operating Manual

4
Insert the new Micro HEPA Filter
by reversing the process.
5
Turn the lock latch of the Micro HEPA Filter in the direction of the arrow to lock
the Micro HEPA Filter in place.
6
Plug in the power cord of RAYCOP, and RAYCOP will automatically be in standby
mode (P.9). Use a pointy object such as a toothpick to press and hold the reset
button for a couple of seconds until a chime is heard.
Only press the reset button after replacing
Caution
the Micro HEPA Filter after hearing the
replacement alarm sound.
7
As shown in the diagram below revert the process of opening, confirm the correct
position of the hook and close the Micro HEPA Filter Cover.
The Micro HEPA Filter is a consumable product. Please purchase genuine
Caution
RAYCOP consumables at www.raycop.com
Please make sure it is unplugged and
Warning
the power is turned off before cleaning or replacing.
※ Securely set the Micro HEPA Filter
by pressing it down firmly.
17