Safety Instructions - KAYSER INOXcreamer Operating Instructions Manual

Cream whipper 0,5 l / 1,0 l
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
impOrtant instructiOns FOr
use
– Kayser creamer chargers are to be handled
according to the safety instructions on the charger
packaging.
– Only use Kayser creamer chargers.
– Do not expose the INOXcreamer to heat or direct
sunlight.
– Store the creamer only in the refrigerator; never
in the freezer compartment or the deep freeze.
– Do not remove the head of the creamer when the
INOXcreamer is pressurised.
– No changes may be made to the INOXcreamer or
its safety devices.
– Only Kayser original spare parts may be used.
Please contact us if necessary.
– Do not use sharp-edged objects when cleaning.
When dismantling the INOXcreamer, only remove
the parts shown on the drawing. If the creamer
has been out of use for a long time, it must be
rinsed out with hot water in all cases before it is
reused.
saFety instructiOns
Creamers are pressurised containers and therefore
require special safety precautions.
– Never use a damaged INOXcreamer. If an INOX-
creamer is dropped on the floor, it must be
checked by us before being reused.
– Creamers and creamer chargers must be stored
out of reach of children.
– Do not lean over the INOXcreamer when screwing
in the charger.
– The head of the Kayser creamer very easily
screws onto the threading of the Kayser bottle.
Never use force. Never cross-thread the Kayser
head.
– Never remove the valve screw from the
pressurised INOXcreamer.
– The INOXcreamer is equipped with a pressure-
limiting device which is located inside the metal
piercing unit.
– Do not tamper with this assembly or attempt any
adjustments as this would invalidate the guarantee
and exclude our liability.
– Keep these operating instructions in a safe place
as they help to prevent operating errors.
– Use the INOXcreamer only for the purpose
indicated in these operating instructions.
WarninG
Kayser cream whipper heads must only be
screwed onto Kayser bottles. the Kayser logo
can be found on the whipper head and the base
of the bottle. the use of components other than
original Kayser components can be dangerous.

Advertisement

Table of Contents
loading

Table of Contents