Advertisement
● When viewing a 3D video under a fluorescent lamp (50 Hz – 60 Hz) or 3-wavelength lamp, you
may notice a small amount of screen flickering.
✎ If so, dim the light or turn the lamp off.
● Selecting a menu option on the TV may disrupt the audio output.
● If the 3D glasses move outside of the effective range of signal reception, the signal from the
TV will disconnect and the display and audio for the 3D glasses will turn off after 3 seconds.
The 3D glasses will automatically power off 30 seconds after the display turns off. When this
happens, the red LED will turn on for 3 seconds.
✎ If you move outside of the recommended range of use for a brief period of time, 3D
operation and audio may be disrupted.
● If you lie on your side while watching TV with 3D active glasses, the picture may look dark or
may not be visible.
● The 3D glasses may not function properly if there are any nearby 3D products or
electromagnetic devices (a microwave or a device that uses 2.4 Ghz-bandwidth frequency
such as an Internet router) turned on. If an unintended operation of the 3D function occurs, it
is best to remove nearby electromagnetic devices or wireless communications devices.
● If a lens or any part of the 3D glasses is defective or damaged, the glasses cannot be repaired
and should be exchanged. Broken 3D glasses can be exchanged for a new pair free of charge
within the warranty period. Note that damage caused by the fault of the user is not covered by
the warranty.
‹ Installation Guide
● In the 3D Video Sync menu, set Current Mode to Stand-Alone or Master.
✎ Audio is not available in Slave mode.
● The audio connection menu can only be activated or accessed in Shop mode.
● Attach the lock device to the lower part of the handle on the glasses.
SSG-S3000GR_L2.indb 3
Troubleshooting
Issues
Try This.
Ensure that your Samsung TV and 3D glasses are within a
¾
distance of 6m.
Check the 3D function settings on the TV.
The 3D glasses do not function.
¾
Check that the audio is connected in the setup menu.
¾
¾
Press the reset button and then press the power button.
The red LED of the power button blinks
The battery is low. Charge the battery.
¾
continuously.
Product specifications (model name: SSG-S3000GR)
Shutter
Optical properties
Recommended viewing
distance
Weight
Glasses
Power
Glasses
When both the glasses and
audio are turned on
When only the glasses are
turned on
Power consumption
Battery
Operating temperature
Operating conditions
Storage temperature
✎ Specifications of this product are subject to change without notice to improve quality.
Liquid crystal shutter Transmission
37±2%
rate
2~6m
Field rate
120 fields/s
150g
3.7V Lithium-polymer battery x 1
70mA
4mA
Type
650mAh, 3.7V
When both the
10 hours (when the
glasses and audio
sound is at a medium
are turned on
volume level)
Run time
When only the
hours
glasses are turned
160
on
0°C ~ 40°C
-20°C ~ 60°C
English-3
2011-02-07 오후 5:36:24
Advertisement
