Advertisement
4. Select "Yes" to open the Bluetooth headphone connection menu.
✎ Select "No" if you want to disable the sound on this product.
5. Perform a device search and select 3D glasses (model: S3000GR).
✎ The model number is indicated on the product.
✎ A device search may not find the 3D glasses if they are too far from the TV.
✎ If the device is not found, press and hold both the volume control buttons <+, -> for 2 seconds and
then try a device search again.
6. Select the connect menu on the TV screen. The glasses will attempt to connect to the Samsung 3D
TV.
✎ A connection will not be established if the 3D glasses are turned off.
7. If a connection is established, a beep will indicate the connection and sound will output from the
speakers.
✎ If the first pairing fails, press and hold the power button on the 3D glasses for 2 seconds and
perform pairing from step 3 (ensure that 3D mode is selected in Shop mode).
<Pairing is needed again in the following occasions>
– The 3D glasses do not function even when the power button is pressed (after the 3D TV was
repaired).
– You want to view 3D video on a new Samsung 3D TV released in 2011.
‹ Using the 3D glasses
Powering on the 3D glasses
1. Briefly press the power button on the 3D glasses that were paired successfully.
2. The green LED will turn on for 3 seconds and a beep will indicate that a connection is being
established again.
3. Select "Yes" in the "Previously connected Bluetooth headset is turned on. Do you want to connect?"
option.
4. Sound will output from the speakers if a connection is established.
English-2
SSG-S3000GR_L2.indb 2
Powering off the 3D glasses
1. Briefly press the power button.
2. The red LED of the power button will turn on for 3 seconds and there will be a beeping sound.
3. The 3D glasses will power off.
✎ Control the volume using the volume control (+/-) buttons. A beeping sound indicates that the
volume is maximized or minimized.
‹ Charging the battery (more than 3 hours is required)
If the red LED of the power button blinks every 3 seconds, charge the battery on the glasses as shown
below. The charging status LED will turn red when charging is in progress. The charging status LED will
turn off when charging is complete.
Micro USB cable
‹ Viewing guidelines
● Audio on this product is only available when 3D mode is selected in Shop mode.
✎ If the 3D glasses do not function in 3D mode, the speakers will not function.
✎ Both the 3D glasses and speakers do not function in 2D mode.
● The power cannot be turned on or off if the green or red LED of the power button is on.
● There will be no audio output if the sound is muted on the TV.
SAMSUNG TV
USB1
USB
PC
Notebook PC
2011-02-07 오후 5:36:24
Advertisement
