Package Contents; Installation - Lindy 38111 User Manual

User Manual
Introduction
Thank you for purchasing from the LINDY HDMI Extender series. This HDMI Extender series
allows you to distribute multiple displays over long distances for applications such as digital
signage, public display and large scale presentations. With support for crystal-clear digital
video, including 3D video, these extenders can take your distribution system to the next level.
This range of products can easily be combined and cascaded to suit almost every application
through the use of inexpensive Cat.6 cable; providing a simple to install, cost effective solution
whether you are distributing or simply extending a HDMI signal.
Features

HDMI signal extension through high quality shielded Cat.6 cable – using unshielded
Cat.6 cable results in shorter distances by approximately 10m per segment
 Cat.6 cable implementation to minimize use of high-cost HDMI cable

Ability to cascade up to 4 levels
 HDMI 1.3 compliant, 1080p60 and 3D capable with HDCP support
 Supports digital video formats in Deep Colour Mode at up to 36 bits (12bits/colour)
 Support for LPCM 7.1 and lossless compressed (Dolby TrueHD, Dolby Digital Plus &
DTS-HD Master Audio) Digital audio
 Pure hardware solution
 Typical Cat.6 cable lengths @ 8bit/colour:
No. Function
38111 1:8 Splitter
38110 Transmitter TX
38109 Extender EX

Package Contents

 8 Port Splitter/ Transmitter No.38111 or Transmitter (TX) No.38110 or
Receiver (RX) No.38112 or
 Multi Country Power Supply with 4 adapters for EURO, US, UK, AUS/CN
 This manual

Installation

1. Before connecting any extender equipment please switch off all devices.
2. Connect the HDMI display to the RX receiver module using HDMI cables.
3. Connect the RX modules to the EX or TX or 8 port Splitter/Transmitter modules using
appropriate high quality Cat.6 or Cat.6A SFTP cables.
4. If you are using EX modules please set the selector switch to CAT6 position if you are
using the RJ45 input port. If you want to use the HDMI input port set the switch to HDMI
position.
5. Set the EDID selection switch on EX and 8 Port Splitter/Transmitter to 8 Bit or 12 Bit
according to what your HDMI display and source equipment support and to what
distances you want to reach. Please note that 12 Bit setting limits the maximum Cat.6
cable length on output to 15m.
PC 1080p Player 2D 1080p
40m 40m
30m 30m
40m 40m
Extender/Repeater (EX) No.38109
Player 3D 1080p
40m
20m
40m
English