Appendix 4: Operation With Centring Laser - GE ERESCO MF4 Series Operating Manual

Appendix 4: Operation with Centring Laser

CAUTION:
Press the button (1) to switch on the laser.
If the laser beam extinguishes, replace the batteries. To achieve this, remove the screw
cap (2).
Use 2 x AAA micro alkaline batteries or equivalent. Ensure correct polarity of the batteries.
Insert batteries according to the drawing (3). The laser is reverse polarity protected, i.e. the
laser cannot be switched on with incorrectly inserted batteries.
Technical Data
Power:
Battery operation:
Laser type:
Wavelength:
Dimensions (WxDxH)
Copyright by GE Sensing & Inspection Technologies GmbH
84
Operating Manual ERESCO MF4 Type Series
(1)
Laser radiation, never look directly into the laser beam!!
Keep the laser out of reach of children.
<= 1 mW, laser class 2
2 x 1.5 V AAA micro alkaline or equivalent
Semi-conductor diode laser
635 - 670 nm red
175 x 17 x 50 mm
Bogenstrasse 41 D - 22926 Ahrensburg
(2)
(3)
08/24/2016
6. Edition, ID No.: 37020GB-F