tion artifacts and the ill-effects of line interference. To ensure a strong
bond with the skin, it is advised to remove excessive hair and wipe the
skin area and the EMG Sensor with isopropyl alcohol to remove oils
and surface residues. Allow the skin to dry completely before apply-
ing the interfaces.
Adhesive Sensor Interfaces are for single use only.
Immediately discontinue use if skin irritation or discomfort oc-
curs. All Adhesive Sensor Interfaces and Reference Electrodes are
for single use only. Discard after using. Reseal storage bag to main-
tain freshnes
Sensor Pairing
Trigno sensors communicate with a custom wireless protocol that
links each sensor to a Personal Monitor. This linking process is known
as sensor "pairing", and is initiated through the "Pair" command.
1. Initiate sensor pairing in software.
When using EMGworks, initiate pairing by right-clicking the Trigno
hardware icon in the system notification area, and selecting the ap-
propriate menu item.
Figure 10.
Selecting the Pair command form the Windows Tray Icon.
Right click to access menu options.
16