3 Applications
To provide a wireless audio trans
mission system, combine the pocket
transmitter TXS707HSE / 707LT with
the following receivers from IMG
STAGELINE:
TXS707 with 1 receiver unit
TXS727 with 2 receiver units
Setting the transmission channel is
most convenient: Just set the chan
nel at the receiver; via an infrared
signal from the receiver, the trans
mitter will then be set to the same
channel .
3.1 Conformity and approval
Herewith, MONACOR INTERNA
TIONAL declare that the pocket
transmitters TXS707HSE and TXS
707LT comply with the directive
2014 / 53 / EU . The EU declarations
of conformity are available on the
Internet:
www .imgstageline .com
Restrictions or requirements
apply in the following countries:
CZ
DE
IT
LT
In the Federal Republic of Germany,
the pocket transmitters require a
frequency assignment (for which
a fee is charged) . The registration
forms and pertinent information
can be found on the website of the
Bundesnetzagentur (Federal Net
work Agency):
www .bundesnetzagentur .de
EL
FI
FR
MT
PL
In other countries, it is necessary to
apply for a corresponding approval .
Prior to operating the pocket trans
mitter outside Germany, please
contact the MONACOR subsidiary
or the corresponding authorities of
the respective country . Links to the
national authorities can be found via
the following Internet address:
www .cept .org
t ECC
t Topics
t Other spectrum topics: SRD
Regulations and indicative list of
equipment subclasses
t EFIS and National Frequency
Tables
4 Setting into Operation
4.1 Inserting the batteries
For operating the pocket transmitter,
two 1 .5 V batteries of size AA are
required .
•
Always insert (rechargeable) bat
teries of the same type and always
replace all of them .
•
If the pocket transmitter is not
used for a longer period of time,
always remove the batteries to
prevent damage due to battery
leakage .
To open the battery compartment
(9), press the arrow of the battery
compartment cover (6) and push the
cover downwards . Insert the batter
ies, with the positive and negative
9