Mercedes-Benz C-Class Coupe 2019 Operator's Manual page 96

94
Seats and stowing
instrument cluster. A warning tone will also
sound.
The seat will move automatically to the
stored position.
If the set seat position can no longer be reached,
e.g. because of luggage in the rear footwell or
after occupants have entered the rear of the
vehicle:
Pull seat release handle 1
#
the seat backrest to an upright position.
The seat will lock in the new fore-and-aft
position.
Switching the seat heating on/off
& WARNING Risk of burns due to repeat‐
edly switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest
padding to become very hot.
The health of persons with limited tempera‐
ture sensitivity or a limited ability to react to
high temperatures may be affected or they
may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it is
switched on repeatedly.
* NOTE Damage to the seats caused by
objects or documents when the seat
again and return
heater is switched on
When the seat heater is switched on, over‐
heating can occur due to objects or docu‐
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to
the seat surface.
Make sure that no objects or docu‐
#
ments are on the seats when the seat
heater is switched on.
Requirements:
The power supply is switched on
R
To switch on/increase the level: press but‐
#
ton 1 repeatedly until the desired heating
level is set.
Depending on the heating level, up to three
indicator lamps light up.