Mercedes-Benz C-Class Coupe 2019 Operator's Manual page 153

Check if the transmitter frequency of the
#
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
R
Press and hold button 1,
#
wish to program.
Indicator lamp 4 flashes yellow.
% It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
Release the previously pressed button.
#
Indicator lamp 4 continues to flash yellow.
Point remote control 5 from a distance of
#
1 in (1 cm) to 3 in (8 cm) towards buttons
1, 2 or 3.
Press and hold button 6 of remote control
#
5 until one of the following signals appears:
Indicator lamp 4 lights up green contin‐
R
uously. Programming is complete.
Indicator lamp 4 flashes green. Pro‐
R
gramming was successful. Additionally,
synchronization of the rolling code with
the door system must also be carried out.
If indicator lamp
#
green: repeat the procedure.
Release all of the buttons.
#
% The remote control for the door drive is not
included in the scope of delivery of the
2 or 3 that you
garage door opener.
Synchronizing the rolling code
Requirements:
The door system uses a rolling code.
R
The vehicle must be within range of the
R
garage door or door drive.
The vehicle as well as persons and objects,
R
are located outside the range of movement
of the door.
4 does not light up or flash
Driving and parking 151
Press the programming button on the door
#
drive unit.
Initiate the next step within approximately
30 seconds.
Press previously programmed button 1,
#
or 3 repeatedly until the door closes.
When the door closes, programming is com‐
pleted.
2