Mercedes-Benz C-Class Coupe 2019 Operator's Manual page 407

tically under the jacking point of the
vehicle.
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Position jack 2 at jack support point 1.
#
Turn crank 3 clockwise until jack
#
completely on jack support point
base of the jack lies evenly on the ground.
Turn crank 3 until the tire is raised a maxi‐
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel
#
( page 405).
/
Removing a wheel
Requirements:
The vehicle is raised (
R
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may not recog‐
nize dangers.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
2 sits
pletely.
1 and the
Wheels and tires 405
page 403).
/