U-Line H-1619 Manual page 6

Push the BOTTOM WRAPS button to select the number of bottom wraps desired (0 - 9).
Turn the CARRIAGE SPEED adjustment knob clockwise to increase, and counterclockwise to
decrease the carriage speed. This allows you to adjust the overlap of your film.
Turn the TURNTABLE SPEED adjustment knob clockwise to increase, and counterclockwise to
decrease the turntable speed.
The BANDING button is used for applying multi-layer reinforcing wraps in automatic or manual
mode. Push and hold this button: the carriage will stop raising / lowering. When released, the
carriage will resume its movement.
The EMERGENCY STOP button stops the turntable in the event of emergency. This will NOT stop the
turntable instantly. The turntable will coast to a stop, depending on the load's weight, after this
button is pushed.
This switches the main power ON or OFF.
PAGE 6 OF 33
CONTROL BOX CONTINUED
WARNING! The fOOT SAfETy BAR, located underneath the film carriage works only when
the machine is ON. When the bar is activated, the main power will shut Off. Releasing
the bar will reactivate the main power. push START button to resume the operation.
0913 IH-1619