U-Line H-1619 Manual page 10

RECOMMENDED SCALE CONfIGURATION VALUES
NOTE: Changing the scale parameters to values other than the recommended values may result in poor
scale operation.
NAME/CODE
F1: GRADUATIONS Specifies the number of full-scale graduations. Value should be consistent with legal
requirements and environmental limits on the useful system resolution.
F2: SPAN GAIN Span Gain is related to A/D integration time. The larger the span gain, the higher the internal
resolution, but the slower the update speed. Note that the scale must be re-calibrated
whenever this parameter is altered. See Appendix C in the scales manual for more information.
F3: ZERO TRACK BAND Selects the range within which the scale will automatically zero. Note that the scale must be in
a standstill to zero the scale.
F4: ZERO RANGE Selects the range within which the scale may be zeroed. Note that the indicator must be in
standstill to zero the scale.
F5: MOTION BAND Sets the level at which motion is detected by comparing the present display update with the
previous one. If motion is not detected for two seconds or more, scale is in standstill and can
process a Print or Zero command. Maximum value varies depending on local regulations.
F6: DIGITAL FILTER Averages weight readings to produce higher stability but slower the indicator's response time.
Choose 8 unless a very fast response is needed.
F7: OVERLOAD LIMIT Selects the desired formula which determines the point at which the indicator shows overload.
All selections are based on the primary unit selected in F8.
F8: CALIBRATION UNIT Selects the primary base unit to be used in the calibration process. Also the default unit for
normal operation. 1 = pounds, 2 = kilograms.
F9: DISPLAY DIVISIONS Determines the desired weight increments. Value should be consistent with legal requirements.
F10: DECIMAL POINT Determines the location of the decimal point.
F16: ZERO CALIBRATION Places the scale in a Zero Calibration routine.
F17: SPAN CALIBRATION Places the scale in a Span Calibration routine.
PAGE 10 OF 33
DESCRIpTION RECOMMENDED
VALUE
5000
100
3
100
1
8
2%
1
1
0
—
—
0913 IH-1619