Connecting Servers To The Switch - Belkin OmniView F1DP108Gea User Manual

Local Installation
Step 3 Connecting Servers to the Switch
3.1 Make sure your server is powered off.
3.2 Using the Belkin OmniView SMB Server Interface Module for PS/2
(F1DP101AeaAP), connect the VGA connector to the monitor port on
your server. (Refer to diagram below.)
Server
3.3 Connect the PS/2 mouse and keyboard connectors to the mouse and
keyboard ports on the server. (Refer to diagram below.)
16
(PS/2 Connection)
Server Interface Module Server Interface Module