On-Screen Display - Belkin OmniView F1DP108Gea User Manual

Using the Switch from a Local Console
On-Screen Display (OSD)
The OSD allows you to switch servers, assign names to your servers, enable and
disable the AutoScan feature, set the desired scan-time interval for AutoScan,
enable the password security feature, and program hot keys. To access the OSD
menu, press "Scroll Lock", "Scroll Lock", and the space bar. Immediately, the
OSD overlay screen will appear. The superimposed menu screen is generated by
the Switch, and does not affect the function of your server, operating system, or
software function.
Note: The local OSD should only be used on the local console. It is not intended
for remote access operation.
Main OSD-Menu Page
The main OSD menu displays the current selected BANK and connected servers
to that BANK. If you have only one Switch in your configuration, the OSD menu
will display "BANK 00". A "✹" symbol indicates that the connected server is
powered up. If the OSD menu does not display a "✹" symbol for a server that is
connected and powered up, you will need to reset the Switch to re-detect the
server. This is done by simultaneously pressing the "BANK +" and "BANK –"
buttons on the front panel.
62