Sound Menu - Camec RV Media Evolution 044694 Instruction Manual

SOUND SUB-MENU
Sound Mode
Press the ▼/▲ buttons to select Sound Mode. Then press the OK button to select from a list
of sound modes. The sound mode can be switched between standard/music/movie/sports/
user using the ◄ / ► buttons.
Custom Equaliser
These settings allow you to tailor the TV's audio output to your preferred settings.
The frequencies adjust the following ranges: 120Hz - Bass, 500Hz - Midbass, 1.5KHz -
Midrange, 5KHz - Upper Midrange, 10KHz - Treble
These settings can only adjusted when the Sound Mode selection (above) is set to User.
Once this is set, Press the ▼/▲ buttons to select the setting you would like to adjust:
Then use ◄ / ► buttons to increase or decrease the setting.
Balance
Press ▼/
to select Balance and then press OK button to go into the Sub menu.
▲
With the◄ / ► buttons, the balance (between left & right speakers) can be adjusted.
Auto Volume (AVL)
This function when turned on will help even out the volume level between different A/V
sources so one is not greatly louder than another. It can also help reduce the volume of loud
TV ads compared to TV shows. The result depends greatly on the A/V source so this function
is set default to off. To turn AVL on, press ▼/▲ buttons to select Auto Volume and then press
OK. Press ◄ / ► buttons to turn AVL on/off.
Surround Sound
This mode is ideal for movies and simulates multi-speaker surround sound output.
SPDIF Mode
This setting selects the output mode for the coaxial digital lead. The default setting is PCM and
this should be suitable for most amplifier connections.
NOTE a coaxial digital connection is not required with HDMI connections.
AD Switch
This turns on the Audio Description function where available.
18