Picture Menu - Camec RV Media Evolution 044694 Instruction Manual

PICTURE SUB-MENU
Picture Mode
Press ▼/▲ buttons to select Picture mode, and go into next interface by pressing the OK
button. Then you can change picture mode to standard/mild/dynamic/personal
using the ▼/▲ buttons.
Note: Button no. 6 on the Remote Control also performs this function. Press the button
repeatedly to cycle through the available Picture Mode options.
Contrast, Brightness, Colour, Tint, Sharpness
Note that you can only adjust the Contrast, Brightness, Colour,
Tint & Sharpness settings when the User Picture Mode is selected. Press the ▼/▲
buttons to select the picture adjustment you would like to make then press the
to adjust the desired setting.
Colour Temp
Press ▼/▲ to select the Colour Temp menu item, and then the OK button to take you to next
menu where you can change Colour Temperature. Modes available are standard, warm,
cool and personal. You can alter colour temperature with the ▼/▲ buttons.
Aspect Ratio
Press the ▼/▲ buttons to select the Aspect Ratio you would like to make then press the
buttons to select the Aspect Ratio from: Auto (Default), 4:3, 16:9, Zoom1, Zoom2.
Note: Button no. 20 on the Remote Control also performs this function. Press the button
repeatedly to cycle through the available Aspect Ratio options.
Noise Reduction
Noise reduction helps filter out and reduce image noise which can improve the picture quality
from poor video sources.
Press ▼/▲ to select the Noise Reduction menu option, and then the OK button to take you to
next menu. Then press the ▼/▲ buttons to select off/low/middle/high.
17
/ buttons
/