Contents Important Safety Instructions What’s in the Box Controls on the TV/Installation TV Inputs and Outputs Remote Control Installing Batteries in the remote Getting Started - Power Connection Low Battery Voltage Warning First Time Installation Using the EPG (Electronic Program Guide) MAIN MENU OPERATION Channel Picture Menu...
IMPORTANT SAFETY INSTRUCTIONS • Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label of the power adaptor being used.. • Only use this TV with the power adaptors supplied. If either plug does not fit into your outlets, consult your dealer or an RV service center for replacement of the outlet.
Page 6
IMPORTANT SAFETY INSTRUCTIONS Cont’d Usage conditions and restrictions • Follow the instructions in this manual when installing and adjusting the TV set. Only adjust those controls that are covered in this instruction manual; improper adjustment of other controls may result in damage. If this happens, unplug the TV and have it serviced by appropriately qualified personnel.
Page 7
IMPORTANT SAFETY INSTRUCTIONS Cont’d • When deciding where to put the TV set, make sure the location is: • Well ventilated. Leave at least a 20cm space all around the TV set for good ventilation. • Protected from overheating and away from direct sunlight. •...
TV CONTROLS CONTROLS ON THE TV 8. INPUT - This button switches between all the different sources of the TV. When the OSD is active, this button acts as the enter button and confirms the menu selection. 7. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return selection to the previous menu level.
TV INPUT & OUTPUTS PC IN PC IN PC IN PC IN NOTE: Please, make sure the inputs and outputs have solid connections before connecting power. 1. POWER (DC12/24V or plugpack) input. 2. Video Out: This mirrors the Video Signal from Input 12 (A/V) ONLY. The output is Video only; not audio.
Page 12
REMOTE CONTROL FUNCTIONS Note as this TV does not include a DVD player, some func ons are not available and some bu on diagram number alloca ons are not used. Press to display EPG (Electronic Program informa on) for TV. Smart TV - return to home screen.
REMOTE CONTROL BATTERIES AND RANGE Installing Batteries Open the battery compartment cover on the back side. Battery Cover To use the remote control, point it towards the special remote sensor slightly below the television. The remote has a range of up to seven Insert two 1.5V AAA size Alkaline* meters from the TV at an angle of batteries in the correct polarity.
GETTING STARTED - POWER CONNECTION Power Connection Options Power Adaptors Your RV Media TV with inbuilt USB functionality can operate from two different power sources allowing you to use your T V in a multitude of applications: - Caravans, Campers & RV’s - Trucks (12V or 24V operation) - Marine (12V or 24V operation) - Store Demonstrations...
GETTING STARTED - BASIC OPERATIONS Remote To select a TV Channel, first select Sat or DTV as an input source first, then choose your desired channel in one of the following ways. Remote ON SCREEN LOW BATTERY VOLTAGE WARNING If the RV’s system voltage drops below 11V* when powering the TV via the 12V accessory lead, an on screen warning will be displayed warning you of the low voltage state.
Firstly connect an RF Antenna cable from the TV’s RF output to the TV Antenna socket. When you turn on the TV for the first time or Reset the TV from the Setup menu, you will be presented with a number of dialogue boxes that will step you through the TV tuning process. Setup Process First Time Installation Menu Selection 1: Language - English - select OK on the remote.
EPG - ELECTRONIC PROGRAM GUIDE SCHEDULE RECORDING & REMINDERS Press the EPG button on the Remote control to access the Electronic Program Guide (DTV only) Use the ▼/▲ keys on the remote to select a channel. The current programme on that channel will be displayed in the box on the right.
Press the Menu button on the remote to select the Main Menu. From there, you can use the buttons to select between the following sub-menus: - Channel - Picture - Sound - Time - Option - Lock Once you select a sub-menu, use the buttons to select an option in the sub-menu.
Page 19
DTV TUNING cont’d Use the coloured buttons on the remote to edit the channels. First press the buttons on the remote to highlight the channel you want to select, then: Press the button to delete the channel from the program list. Press the Yellow button to move the channel in the list.
PICTURE SUB-MENU Picture Mode Press ▼/▲ buttons to select Picture mode, and go into next interface by pressing the OK button. Then you can change picture mode to standard/mild/dynamic/personal using the ▼/▲ buttons. Note: Button no. 6 on the Remote Control also performs this function. Press the button repeatedly to cycle through the available Picture Mode options.
SOUND SUB-MENU Sound Mode Press the ▼/▲ buttons to select Sound Mode. Then press the OK button to select from a list of sound modes. The sound mode can be switched between standard/music/movie/sports/ user using the ◄ / ► buttons. Custom Equaliser These settings allow you to tailor the TV’s audio output to your preferred settings.
Page 22
BLUETOOTH Bluetooth Press the ▼/▲ buttons to select Bluetooth. Then press the OK to enter the Bluetooth sub-menu. Press ► to activate the TV’s Bluetooth Audio transmitter. Bluetooth Pair Press ▼/▲ the buttons to select Bluetooth Pair then press the OK button to select. The TV will then search for available Bluetooth playback devices such as Speakers, Headphones etc.
Page 23
SOUND SUB-MENU - BLUETOOTH cont’d Disconnect Press the ▼/ buttons to select the Disconnect and OK to select. Use this option to ▲ Disconnect the currently paired Bluetooth device, but not turn off the TV’s Bluetooth transmitter. This will also re-activate the TV’s internal speakers. Bluetooth Reset Should your Bluetooth device stop working or its operation become intermittent, or you wish to clear some of the Bluetooth devices from the Paired List, then press the ▼/...
TIME MENU Clock The clock and date is automatically programmed from information received from DTV Channels. You should not need to use this sub-menu once you have received a DTV signal, however this can be manually changed if required. Off Time This setting allows you to set a specific time to turn the TV off.
Page 25
OPTION MENU OSD Language Select OSD Language with the ▼/▲ buttons then press OK to adjust the on-screen Language. TT Language This setting is not used in Australia & New Zealand Audio Languages Press ▼/▲ to select Audio Language and select language with▼/▲ or ◄...
OPTION MENU cont’d HDMI CEC HDMI CEC allows devices connected to the TV via HDMI to communicate back and forth with the TV. Please see below for specific CEC settings CEC Control: Press the ◄ / ► buttons to turn CEC Control on of off. The default setting is On Audio Receiver: Press the ◄...
LOCK MENU Lock System Select Lock System with the ▼/▲ buttons and press OK. Then enter the password (default is “0000") to access the Block Program, Parental Rating Key Lock & Hotel Mode menus. SET Password Select Set Password with the▼/▲ buttons. Then press the OK button to enter the old password (default is “0000”) and then set a new password by entering it twice.
PVR - PERSONAL VIDEO RECORDER FUNCTIONS RECORD Live TV Ensure you have a correctly formatted USB drive inserted in the TV before recording. If the USB drive is not formatted properly, the TV will display a message advising that the USB drive needs to be formatted.
MEDIA PLAYBACK Select “MEDIA” as a Source on the TV using the remote Control Press the ◄ / ► buttons to select Photo/Music/Movie/Text, and then press the ENTER button to select the appropriate selection. NOTE: A USB device must be plugged in to use these functions. Important Advice on USB operation.
MEDIA PLAYBACK Cont’d MUSIC PLAYBACK 1. Select MUSIC with the ◄ / ► buttons, and then press the OK button to enter sub_menu. 2. Select C:\, then press the OK button to select the USB drive. 3. Using the arrow keys, select a specific song, and press the button to play, press the button to play the previous song, press the button to play the next song.
MEDIA PLAYBACK Cont’d MOVIE PLAYBACK 1. Select MOVIE with the ◄ / ► buttons, and then press the OK button to enter sub menu. 2. Select C, then press the OK button to select the USB drive. 3. Highlight the specific video. When highlighted, the file information will be displayed and a preview of the video will start playing in the middle of the screen.
Smart TV session is kept open. It will take approx. 20 seconds before you can turn the TV on after disconnecting the power while it boots up in the background. Help/Updates Please visit the Camec website, www.camec.com.au and search the RV Media 32" Smart TV for any info/updates should they become available. First Time Operation...
SMART TV CONFIGURATION Select “Start Configuration” by pressing OK on the remote. Then press OK again which selects English as the system Language Next using the arrow keys on the remote, select either a WiFi or Ethernet Internet connection. An Ethernet connection will immediately provide an Internet connection once you connect the network cable to the RJ45 port at the back of the TV.
Page 34
SMART TV CONFIGURATION Next you will be presented with the Date & Time screens. If you are connected to the Internet, this information should be automatically completed so just press the OK button on the remote to cycle through these screens. Next press Ok to complete the setup to move on to the calibration screen.
SMART TV OPERATION - HOME, FAVOURITES & WEB Home Menu The Home Menu consists of four main Sub Menus. The default menu is Favourites. This has shortcut icons to the internal file Browser, Settings Menu and Web Browser. To select one of the four sub menus, use the left and right arrow keys on the remote to highlight it, then the down arrow on the remote to enter that sub menu.
SMART TV OPERATION - APPS & SETTINGS Apps Menu This RV Media TV comes with a number of pre-installed Apps. You can install a new App using the Google Play store or install an .apk file using the Appinstaller App. When a new App is installed, it will appear in the Apps Sub Menu.
SPECIFICATIONS Picture & Sound Model 044694 32" (80cm) Screen Size 1920 x 1080 Panel Resolution (pixels) 250 cd/m Brightness 1400:1 Contrast Ratio Response Time 178 (H) x 178 (V) Viewing Angle Display Type 16:9 Aspect Ratio 2 x 8W Speakers 480i, 480P, 576i, 576P, 720P, 1080i, 1080P HD Modes DVB-T/PAL...
Page 41
As RV Media continually strives to improve its products, Specifications may be subject to change without notice. Warranty This product is backed up with a 2-Year Nationwide Warranty. Warranty Help line New Zealand: 09 257 2419 Australia: 1300 654 936 Evolution 32"...