First Time Installation - Camec RV Media Evolution 044694 Instruction Manual

Firstly connect an RF Antenna cable from the TV's RF output to the TV Antenna socket.
When you turn on the TV for the first time or Reset the TV from the Setup menu, you will be
presented with a number of dialogue boxes that will step you through the TV tuning process.
Setup Process
First Time Installation Menu
Selection 1: Language - English - select OK on the remote. Note this is the menu language
setting.
Selection 2: Country: Australia. Please select a different country if applicable.
Selection 3: Environment: On. There is no need to adjust this setting.
Tuning Setup Menu
Selection 1: Tune Type - DTV. This does not need to be adjusted unless you need to receive
Analogue TV signals (not Applicable for Australia).
Selection 2: Digital Type - Default is "DTV + ATV" - select "DTV" for quicker tuning..
After these selections are finalised, press OK on the remote to begin Auto Tuning (see Channel
SELECTING AN INPUT SOURCE
Press Source on the remote, then use the arrow keys to select your desired source. Press OK
on the remote to select the source.
13