Technical Specifications - THOMSON THT709 User Manual

Problem
Forgotten PIN code/
password.
Forgotten channel lock
code.
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar
distortion, especially on
HD content.
The USB storage device
is not working properly.
Recording is no longer
possible.
The receiver
automatically switches
off after a certain time.

9.0 TECHNICAL SPECIFICATIONS

Demodulator:
Demodulator:
Transmission mode:
Video Decoder:
Profile level:
Video resolution:
Decoding:
Aspect ratio:
Audio Decoder:
Audio support:
Sampling rate:
Audio mode:
* Dolby Digital Plus, Dolby Audio and the double-D symbol are registered trademarks of Dolby Laboratories.
Tuner:
Front End:
Input frequency range:
Input signal level:
Antenna power:
Possible cause
The read/write speed of your USB
device could be too low.
The power consumption is too
high.
The USB device is formatted
incorrectly.
The selected storage medium is
full.
The Auto Standby function is
enabled.
COFDM; 16 QAM/64 QAM; QPSK; 256QAM
2 K - 8 K
HEVC (H265)
AVC/H.264HP@L4.1, MPEG-4 ASP supported
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PAL/NTSC
4:3 Letterbox, 4:3 Pan & Scan, 16:9 Widescreen, Auto
Dolby Digital Plus*/AC3+/PCM
MPEG MusiCam Layer II
32, 44.1, 48 KHz
Stereo, Multi-Audio
DVB-T2, UHF & VHF Tuner
174 – 230 MHz (VHF) and 470 - 790 MHz (UHF)
-20 ~ -82 dBm
5 V DC, max. 50 mA, short cut protected
What to do
The default PIN is 0000 or 1234
(refer to the user manual of your
Device).
Contact your local Service Hotline
or send an email to our Support
via www.strong.tv
Contact your local Service Hotline
or send an email to our Support
via www.strong.tv
Make sure to use a USB storage
device with sufficient speed and
space. Pen drives ('USB sticks') may
not support sufficient speed.
Connect an extra power supply
adapter to your USB HDD device.
Format the USB device on a PC to
FAT 32.
Delete existing recording(s).
Attach and use another storage
medium.
Check the Auto Standby setting
and disable if necessary.
17