Allen-Bradley CompactLogix 1769-L32E Installation Instructions Manual page 19

Assigning an IP address
You can set the IP address using any of these utilities:
• Rockwell BOOTP Utility (available with RSLinx and RSLogix
5000 software)
• RSLinx software
• RSLogix 5000 software
Use BOOTP to set the IP address
The BOOTP utility is a standalone program that is located in one of
the following directories:
• RSLinx Tools directory in the Rockwell Software program
folder on the Start menu (the utility is automatically installed
when you install RSLinx software)
• Utils directory on the RSLogix 5000 software installation CD
Follow this procedure to use the BOOTP utility.
1. Start the BOOTP software.
2. Select Tools>Network Settings.
3. Enter the Ethernet mask and gateway.
4. Click Ok.
1769-L32E, 1769-L35E CompactLogix Controller 19
Publication
1769-IN020-C-EN-P - July 2007