Hardware Specifications; Environmental Specifications; Electrical Specifications; Absolute Maximum And Esd Ratings - Sierra Wireless AirPrime AR7558 Hardware Integration Manual

3. Hardware Specifications

3.1.

Environmental Specifications

The environmental specification for both operating and storage of the AirPrime AR7558 embedded
modules are defined in the table below.
Table 4. AirPrime AR7558 Environmental Specifications
Parameter
Ambient Operating Temperature
Ambient Storage Temperature
Ambient Humidity
Class A is defined as the operating temperature range that the device:

Shall exhibit normal function during and after environmental exposure.

Shall meet the minimum requirements of 3GPP, 3GPP2 or appropriate wireless standards.
Class B is defined as the operating temperature range that the device:

Shall remain fully functional during and after environmental exposure

Shall exhibit the ability to establish a voice, SMS or DATA call (emergency call) at all times
even when one or more environmental constraint exceeds the specified tolerance.

Unless otherwise stated, full performance should return to normal after the excessive
constraint(s) have been removed.
3.2.

Electrical Specifications

This section provides details for some of the key electrical specifications of the AirPrime AR7558
embedded modules.
3.2.1.

Absolute Maximum and ESD Ratings

This section defines the Absolute Maximum and Electrostatic Discharge (ESD) Ratings of the
AirPrime AR7558 embedded modules.
Warning:
If these parameters are exceeded, even momentarily, damage may occur to the device.
Table 5. AirPrime AR7558 Absolute Maximum Ratings
Parameter
VBATT Power Supply Input
VIN Voltage on any digital input or output pin
IIN Latch-up current
4116922
Temperature Range
-30° C to +75° C
-40° C to -30° C
+75° C to +85° C
-40° C to +90° C
95% or less
Rev 1.0
Operating Class
Class A
Class B
---
---
Min Max
- 5.0
- VCC_1v8+0.5
-100 100
January 21, 2015
Units
V
V
mA
14