Table of Contents
Advertisement
Default Gateway
User Name
Password
L2TP Gateway
Connection ID
MTU
Connection Type
Idle Time Out
When you finish settings in this page, click 'Apply' button. You'll see the
following message:
If you still need to configure this Mini wifi travel router, click
'CONTINUE' button; if you want to save changes and make it work
Input the IP address of L2TP default gateway.
Input the user name of L2TP connection server.
Input the password of L2TP connection server.
Input the IP address of L2TP default gateway.
Input connection ID assigns by your ISP (only when
requested by your ISP).
Please input the MTU value of your network
connection here (from 512 to 1492). If you don't know
which value you should use, you can use default
value.
Select connection type here:
Continues: Travel router will maintain connection and
never disconnect
Connect on Demand: Travel router will establish
connection only when there's connection request
from client
Manual: You have to connect or disconnect PPPoE
connection manually (by click 'Connect' and
'Disconnect' button.
Please specify the time to shutdown Internet connect
after no internet activity is detected in minute(s) from
1 to 1000. This option is only available when
connection type is 'Connect on Demand'.
Advertisement
Table of Contents
