SMC Networks EliteConnect SMC2555W-AG User Manual page 65

DHCP Client (Enable) – Select this option to obtain the IP
settings for the access point from a DHCP (Dynamic Host
Configuration Protocol) server. The IP address, subnet mask,
default gateway, and Domain Name Server (DNS) address are
dynamically assigned to the access point by the network DHCP
server. (Default: Enable)
DHCP Client (Disable) – Select this option to manually configure
a static address for the access point.
IP Address: The IP address of the access point. Valid IP
•
addresses consist of four decimal numbers, 0 to 255,
separated by periods.
Subnet Mask: The mask that identifies the host address bits
•
used for routing to specific subnets.
• Default Gateway: The default gateway is the IP address of the
router for the access point, which is used if the requested
destination address is not on the local subnet.
Advanced Configuration
5-7