Vlan - SMC Networks EliteConnect SMC2555W-AG User Manual

Command Line Interface

vlan

This command enables VLANs for all traffic. Use the no form to
disable VLANs.
Syntax
vlan enable
no vlan
Default
Disabled
Command Mode
Global Configuration
Command Description
• When VLANs are enabled, the access point tags frames
received from wireless clients with the VLAN ID configured
for each client on the RADIUS server. If the VLAN ID has not
been configured for a client on the RADIUS server, then the
frames are tagged with the access point's native VLAN ID.
• Traffic entering the Ethernet port must be tagged with a
VLAN ID that matches the access point's native VLAN ID, or
with a VLAN tag that matches one of the wireless clients
currently associated with the access point.
Example
SMC-AP(config)#vlan enable
Reboot system now? <y/n>: y
Related Commands
native-vlanid (page 6-101)
6-100