SMC Networks Barricade SMC7004ABR V.2 User Manual page 91

Print Server Setup
•
•
•
15. Once you have verified all of these settings, click the OK
button to save these settings and close the "Configure
Standard TCP/IP Port Monitor" window.
16. Click Next to continue and view a summary of the
configuration that you have just completed.
17. Click the Finish button to complete the configuration process
of the TCP/IP port
18. The Add Printer Wizard will now guide you through the Printer
Driver installation for the LPR port you just installed.
88
The LPR Settings section should have the Queue Name
set to one of two options depending on the version of
Barricade™ Router you are using.
The Queue Name is LPT1.
Verify that the LPR Byte Counting Enabled and SNMP
Status Enabled options are unchecked.