Trouble Shooting - Fantec QB-X2US3R User Manual

11) t S
roublE hootIng
1. If the noise is present, change
the device with another fan of
size 60x60x10mm 2 pins.
Otherwise return the device
to the retail store.
2. If the transfer rate is not normal, please check if the SATA
hDD jumper is set up in 1.5 or 3.0Gbps.
3. If there is noise with the fan, unscrew and take out the fan cover, pull
out the power cord, clean the fan and assemble it back.
4. If the fan stops working, do not dismantle it. Please return to the
retail store immediately.
5. The heated air would flow out from the fan based on forced
convection process and cool down the chassis' internal temperature.
6. To take the hDD out of the device, slightly press down the
handle and, then pull it out.
FANTEC QB-X2US3R 2-BAY 3.5" RAID
7. USb port of your Pc must support power-off function so that the
device would go into sleeping mode. Setting up motherboard's
(power management) in S3 is strongly recommended. For more
details, please refer to user guide of motherboard bIOS setting.
FANTEC QB-X2US3R 2-BAY 3.5" RAID
40 41