Table of Contents
Advertisement
Parameter
IP Address Pool
Start IP Address
End IP Address
Domain Name
Remember to configure your client PCs for dynamic address allocation
(See "Configuring Client PCs" on page 3-1 for details.)
Description
Specify the start IP address of the DHCP pool. Do
not include the gateway address of the Barricade in
the client address pool. If you change the pool
range, make sure the first three octets match the
gateway's IP address, i.e., 192.168.2.xxx.
Specify the end IP address of the DHCP pool.
If your network uses a domain name, enter it here.
otherwise leave this field blank
LAN
4-25
Advertisement
Table of Contents
