AudioCodes Mediant 800 Quick Setup Manual page 7

Gateway and e-sbc

Hide thumbs Also See for Mediant 800:

Assigning an IP Address to the Device

Use the device's factory default IP address (192.168.0.2/24 and Default Gateway 192.168.0.1) to initially access

the device's Web-based management interface and then change it to suit your networking addressing scheme

for subsequent connectivity.

Using a CAT-5e/6 straight-through RJ-45 Ethernet cable, connect the device's Ethernet port GE 1 (front

panel) to the LAN port on a computer.

Change the IP address of your computer to correspond with the device's default IP address and subnet

mask.

On your computer, open a standard Web browser (for example, Google Chrome), and then in the URL

field, enter the device's default IP address; the Web Login screen appears:

Type in the default username (Admin) and password (Admin), and then click Log In.

Open the IP Interfaces table (Setup menu > IP Network tab > Core Entities folder > IP Interfaces).

7 |

P a g e

Table of Contents