AudioCodes Mediant 800 Quick Setup Manual page 6

Gateway and e-sbc

Hide thumbs Also See for Mediant 800:

DC Power: Insert the male DC plug into the DC inlet (DC 12V) connector located on the device's



rear panel. Make sure that the latch faces up (see figure below) and that it snaps into the inlet.

Plug the female connector located on one end of the AC power cord (supplied) into the AC/DC

power adaptor. Connect the plug at other end of the AC power cord to a standard electrical wall

outlet.

Note: DC power is a separate orderable item and applicable only to Rev. C.

6 |

P a g e

Table of Contents