Hand Strap Attachment - Panasonic WH-0M1201A Operating Instructions Manual

Hand strap attachment

You can install and put a commercial hand strap on the remote control as follows:
1
Simply push the cord section of
the strap and thread it through
the strap hole of the remote
control.
Strap hole
· If you need some help, it would be
easier for you to use a sharp pin to
get the thin cord through the hole.
2
When you take the strap, feed
it through the loop of the line
cord.
Commercial
hand strap
3
Pull the strap all the way
through and tighten it as
shown in the figure.
17