Cell Battery Replacement - Panasonic WH-0M1201A Operating Instructions Manual

Cell battery replacement

Make sure that the remote control is in standby mode before battery replacement.
Slide the Hold switch to prevent the current settings of memory and volume control being changed accidentally. (P. 16)
1
Open up the battery compartment.
Gently press on the cover, slide it toward the bottom
edge of the remote control, and open it up.
· When closing the cover, gently press down on the
cover and slide back to its original position.
Battery compartment cover
2
Insert the battery.
Match the positive and negative terminals to the icons
printed on the back. Snap the battery into place and
close the compartment door (recommended to use
Panasonic alkaline batteries).
· When removing the battery, press the positive terminal
with your index finger's nail and pry it off.
13