Table of Contents
Advertisement
Hold switch
The Hold function is used to bring the remote control
into standby mode to prevent the current settings of
memory and volume control being changed accidentally.
To turn on Hold switch
Slide the Hold switch into the direction as indicated by
the arrow (ON).
To turn off Hold switch
Slide the Hold switch back toward the bottom end, as
indicated by the arrow, so you can change the current
settings of memory and volume control.
Hold switch
16
· When the Hold function is set ON, the memory program
and volume control are disabled.
· When the hearing instrument is turned off and then
back on again while the Hold switch is off, the volume
levels will be reset to the original settings, and the
program will be reset to Memory 1.
ON
OFF
Advertisement
Table of Contents
