Table of Contents
Advertisement
Standby zinc air battery
You can carry zinc air batteries in the remote control as backup batteries in case that you run out of the battery power
while you are out or in situations where batteries are unavailable. A zinc air battery can be installed on each side of the
dry cell battery. Make sure that the remote control is in standby mode before battery insert and slide the Hold switch to
prevent the current settings of memory and volume control being changed accidentally.
1
Open up the battery compartment.
Gently press on the cover, slide it toward the bottom
edge of the remote control, and open it up.
· When closing the cover, gently press down on the
cover and slide back to its original position.
Battery compartment cover
22
2
Insert the zinc air battery.
Do not peel off the tab on the plus (+) side. Secure the
battery with the plus (+) sign facing down in place.
Close the battery door.
Zinc air
battery
Size 13
Standby battery compartment
Note: Zinc air
batteries are
not supplied.
Advertisement
Table of Contents
