Fluke 65 Instruction Sheet page 4

Pushbuttons
Pushbutton
G
F
E
D
Pressing any of the three top pushbuttons wakes up
the thermometer.
Press and hold
temperature. The thermometer clears any stored
maximum and minimum temperatures. The laser
pointer only activates if the laser switch is in the on
position.
G
While is pressed, the display shows
G
Release to stop measuring temperatures and
deactivate the laser. The display continues to show
the most recent temperature and
seconds. Then the display turns off.
F
Press to display the maximum measured
temperature. The display shows MAX.
F
Press a second time to display the minimum
measured temperature. The display shows MIN.
F
Press a third time to turn off this function.
E
Press
displayed temperature. The display flashes TEMP
MEM 5 times to indicate that the operation is
successful.
E
Press to display a stored temperature. The
display shows TEMP MEM. Press
turn off this function.
D
Press to switch between
Description
G
to display the object's surface
and hold for 1 second to save the
o
C and
HHHHH
.
C
for 20
E
again to
o
F.