Parts Diagram; Usb Connector; Child Unit; Quick Start Instructions - The First Years Home & Away Computer-Connect User Manual

Home & Away Computer-Connect Digital Video Monitor
™

Parts Diagram

USB Connector

1 Cap
2 Antenna
3 Connection Indicator
4 USB Plug
1

Child Unit

Antenna
1
Microphone
2
Power button
3
Nightlight button
4
Talkback volume switch (not pictured)
Connection indicator
5
6 Camera
Adjustable-angle camera base
7
Wall mount slots (not pictured)
Cord channel (not pictured)
Nightlight
8
Battery cover (not pictured)
Power jack (not pictured)
Also Included
AC adapter (1) (not pictured)
Software disk (not pictured)
6 get ready for thefirstyears.com
2
3
4
5
1
3
7
2
™
You'll find detailed instructions on the pages that follow.
Please read the Safety Instructions on pages 2–3.
Set up the Computer
Install baby viewer software from included CD into your computer. See detailed
instructions on page 10 if needed.
Set up the Child Unit
• Place unit 4 to 6 feet from child's crib or play area.
• Connect remaining AC adapter to unit and plug into wall outlet.
To use
1. Hold down power button on Child Unit until connection indicator lights up
and blinks to turn it on .
2. Move antenna to full upright position.
3. Lift camera to upright position.
4. Insert USB connector into computer with software installed.
5. Connection indicators
connected.
6. Launch Baby Viewer software.
7. Adjust camera position to ensure desired view is displayed.
8. Use computer volume controls to adjust volume.
Before returning this product to the store for any reason, please contact our
Parent Service Center at 800-704-8697 or cs@learningcurve.com.
4
Often, we can provide helpful tips and instructions to resolve your problem
quickly over the phone or by email.
6
8

Quick Start Instructions

on both units should glow blue indicating they are
get ready for thefirstyears.com
English
7
™