Table of Contents
Advertisement
Moisture
Transport
Pressure/Vacuum
*7ML19985KS01*
Fig. 5: Fork position with flange versions
1 Marking with flange version, facing up
Use the recommended cables (see chapter "Connecting to power
supply") and tighten the cable gland.
You can give your instrument additional protection against moisture
penetration by leading the connection cable downward in front of the
cable entry. Rain and condensation water can thus drain off. This ap-
plies mainly to outdoor mounting as well as installation in areas where
high humidity is expected (e.g. through cleaning processes) or on
cooled or heated vessels.
Fig. 6: Measures against moisture ingress
Caution:
Do not hold SITRANS LVL200S on the tuning fork. Particularly with
flange or tube versions, the tuning fork can be damaged just by the
weight of the instrument. Transport coated instruments very carefully
and avoid touching the tuning fork.
Remove the packaging or the protective cover just before installation.
Siemens Contro
The process fitting must be sealed if there is gauge or low pressure in
the vessel. Before use, check if the seal material is resistant against
the measured product and the process temperature.
SITRANS LVL200S - Operating Instructions
1
13
Advertisement
Table of Contents
